Guide
Another big box of Dewalt tools in for repair. Plus a
Another big box of Dewalt tools in for repair. Plus a broken Bosch hammer and Metabo grinder.
#big #box #Dewalt #tools #repair
“Dean Doherty”
To see the full content, share this page by clicking one of the buttons below |
Dean the ads are getting to be a bit much to be honest
I Had A Corded Black & Decker Drill Wich I Thought Was Hopeless To Fix So I Foundout All It Needed
Was Greasing Then After I Did That It Worked 10 More Years.
It Sounds That Angle Grinder
Needs The Gears Greasing.
I Use Lukas Red Taky Grease
I’m a body man so I like seeing the drills and impacts the most since it’s what I use most
Could you not use the contacts on the 54V battery to replace the 18V contacts?
The answer is, do not buy Dewalt😂
when i found deans channel, i was already fixing tools for myself and others. his channel is growing pretty fast because hes teaching/showing people to rely on themselves to fix problems. people have lost so many life skills thru the on demand/consumer lifestyle we all have given into. its so much of a better feeling fixing something you own as theres a feeling of accomplishment. going out and buying something because something broke has that hollow feeling. at least for me. its not faster but it is cheaper and more fulfilling reaping the rewards of working with your hands.
when i have to order parts, i get 3-5 depending on the part. tools i use alot, i keep extras . when i come to tools, i dont throw anything way until all the parts are used. use what dean is teaching/showing you on all your tools at home. theres channels for small gas powered equipment also. relearn some life skills on how to be self reliant and then pass those on. we could change our throw away/consumer society the more people learn….relearn how to do things for themselves.
thank you, dean.
Good to hear your opinions about the dewalt 54v batteries. Have you found similar problems with Makita’s 40v (36v) xgt?
Your ability to almost instantly diagnose the problem blows my mind.
I’ve never had any problems with my 54v battery’s but then again i don’t let mine die
Nice one Deano
Nice long one this time! I had to watch it in three stints!
After viewing these longer videos, I now know the brands of tools I'll be recommending in the future.
Always enjoyable to watch. Glad to see that right to repair is still alive and well in the power tool arena, but somehow, I'm wondering how long before the manufacturers decide to clip and glue these tools together rather than use screws – hence making them much more difficult, if not impossible to fix – rendering them disposable rather than repairable or serviceable. That's how all other products seem to be going these days – or just by making spares unavailable or too expensive.
More long videos please and thank you
😊❤
These videos are amazing how you know were everything goes is unbelievable keep them coming 👍👍
Dodgy magazine spring on a Dewalt nail gun,..lm surprised the whole gun assembly doesn’t have to be replaced.
I'm surprised some enterprising person hasn't come up with compatible spare parts – particularly where you have to buy whole assemblies.
If that was me I'd need to draw a picture of the bloody thing on paper and tape each screw onto the paper to know where it went lol, great to watch a master at work.
Dean or anyone, can you give me advice on which brand to go for?
We are a farm, all weather work, and so we want a 18v combi drill, angle grinder and impact driver, maybe down the road an sds drill too.
Dewalt generally seems the cheapers per tool but seems like a lot burn out in test videos.
Makita seem good, refined, but most expensive.
Milwaukee, most powerful but not as refined, reliability seems up and down. Some tools cheaper, some most expensive.
Amazing video yet again👍🏻 I wonder if you can advise… I have a DCS565 saw and when I pull the trigger I get a single flash from the LED and no blade movement. The blade does stiffen slightly but then frees up when I turn it a little. I’ve cleaned out all the dirt and dust busy that’s the limit of my knowledge. Any pointers? Cheers
Sir please can you able to give me a drill machine,i will be so thankful for your kindness 🙏
Please sir any drill machine your choice please 🥺
Thanks for it
Thanks!
Nice to see another video.
Very impressed with the method and demonstration of removal of the flex screws
I know an engineer that replaced the cells in his dead 18V dewalt battery, and like you said, total over 20 hours work and that was with hot air station, spot welder, part research, ordering cells, take apart, documenting wires/leads, and testing. He wanted to see the viability and of two he repaired, one eventually failed with a thermal event. Which is why its not wise to open and work on the batteries. Drop off dead ones to recycler/big box and get replacement. Nothing like having a tool catch fire in your van because you opted for knockoff or repaired battery. Great take down and explanation of issues with the tools!
Mate is there any chance to send you a picture with some gears so you would tell me of its normal or not? I am trying to repair worm gear on my parkside kultivator which makes so much noise.
Great Service Seminar! Love the rotary hammer repairs/teardowns. Almost all of the Dewalts were pretty well worn out. I think they got their money out of them. Always enjoy!
Can't upload images from gallery or clipboard ! Anyone know how? All help would be helpful.
Excellent video once again!! Dean, maybe this will save you some time on Makita's.
Get the🍿
Well done Dean another great video I do enjoy the longer videos when I see all the parts on the bench after you've taken something apart and how you remember were they all go back is beyond me fantastic skill set thanks