Guide

Mechanics React to More Awful Tiktok Repair Hacks

Mechanics React to More Awful Tiktok Repair Hacks

#Mechanics #React #Awful #Tiktok #Repair #Hacks

“Real Mechanic Stuff”

We asked real mechanics to break down some of the worst and best car repair hacks from Tiktok. Huge thanks to our experts!

source

 

To see the full content, share this page by clicking one of the buttons below

Related Articles

29 Comments

  1. For that first hack, I had a much more extreme version, I was trying to drill some mounting holes on the engine cradle, and only had wood drill bits and an old single speed drill, after the first half of the holes, I discovered that I could lower the CAR onto the drill (braced on pavement), and exert as much force as I wanted without tiring myself,

  2. The paint pen on the socket works great you just have to use a colour that pops and I use emery cloth or my utility knife to just lightly scrape away the access paint.

  3. its funny thy are worried about the wire striper if your striping a lot of wire to actually need a wire striper you should not be using those stripers for that job because thy suck that much

    those stripers are the cheap crappie ones that come in a box set of tools so cleaning bolts with them actually makes then useful

    do not use those for striping wire go buy a Self-Adjusting Wire Stripper and just use those ones for cleaning bolts LOL

  4. Dude. I clean old bolts all the time. Who doesnโ€™t have a bench grinder with a wire wheel?

    Little brush brush and sheโ€™s good for another run. ๐Ÿƒโ€โ™€๏ธ

  5. I have a homemade specialty tool thats a spiked hammer for the oil filter hack and its really useful for directing where the oil stream goes i use it alot for ford Transit vans because the oil pan is under the block but the oil filter is infront of the radiator so its just outside of the reach of my drain pan

  6. 0:11 thats not a bottle jack……… thats a screw jack…….
    are we SURE these people are mechanics / the hosts know the MOST BASIC things about mechanics??
    .
    "what is the blue jellyfish light on my dash??? and why are people flashing their lights at me??" – donut media, probably
    .
    .
    seriously….. this shit is getting old………
    like… you can see the dude spinning the screw with a drill….. yet you call it a bottle jack………
    .
    and not just 1 host…. but BOTH!!! hosts get it wrong (and they act SO! confident when saying "bottle jack")
    .
    just sad…. what happened to the old Donut media?

  7. The breaker bar video against the toolbox truck is pretty dangerous, for heavy equipment fasteners you use either an impact gun, heat or a torque multiplier to loosen the cutting edge from that bucket.

Leave a Reply