G'day Warren, Thanks man ,cool vid ,they always are. Love the stories too ,just as much as the equipment n fixes . Your channel rulz YT . Keep em comming brother.
I know it's off the subject but how long should it take to remove and replace the steering axle, check bearings, replace seals, replace brake chambers on a 4370 IHC truck?
Of corse, Biden and his green weanies would just say "well! that farmer just needs to scrap everything, and buy electric loaders, tractors, etc. .. No problem, right!? Bunch of colossal MORONS.. Take care Warren. Todd the retired trucker.
You got that right these piece of shit communist are ruining everything. That guy may not own all that land one day soon because the trash government we got.
I used to turn wrenches for a mining company they had an old Komatsu PC-400-1 excavator with a NTC 855 in it. We had a lot of injector problems with it. The plungers would stick down and score the barrels continuously. We figured out that the ultra low sulfur off road Diesel fuel didn’t have enough lubrication for the old mechanical injectors. ( thanks Uncle Sam ) So with this particular machine we started adding like a gallon of used motor oil to the fuel every time she got fueled up. Problem disappeared.
It drives me fucking crazy we can't have English papers inside a fucking package inside the United States. State of this entire country has been going to shit very fast, I got no damn clue what will happen in the future.
It’s sad that customer service and quality control are lost at most large companies and that people accept it. Yeah they will maybe replace the part but who pays for the time and labor from the failure.
I haven’t had the time to watch Warren’s channel as much as I would like but still love the technical content as well as the pearls of wisdom. That last saying, “If it ain’t Chicken sh#t, it sure has henhouse ways about it.” I’m still laughing.😆🤣😂
It brings back fond memories of my long deceased revered Texas grandparents who always had just the right words to fit the moment.
those 6.6 are good engines back when I was field tech for a certain rental company they were in atlas copco 750 compressors and never had any major problem with the 2 dozen or so that I took care of, sad to think about how many perfectly good running ones ended up getting destroyed and replaced with T4 6068 Deere engines thanks to Obama and the tree humpers
Cat own Perkins and so if it's a pease of shit or not. Cat most think they are alright. I have a Massey Ferguson tractor and that's a Perkins Engine and it's never give any trouble. It's the new parts many a time that are faulty. We have had parts for all different makes that are faulty. We have even calibrated new injectors.
Every customer I deal with only wants to change the injectors that are bad…been like this for 2 years now it seems….no skin off my back this is what they are paying me to do nothing more…dont bother me a bit
Hey Warren, lots of work this time of year. It seems to me that quality is nonexistent now a days. I got a box of Kleenex sitting next to me and every time I pull one out it’s all wrinkled and deformed. I don’t remember that happening 30 years ago! It’s all about profit over anything else. You’re the man my friend. Thanks much for getting us a video to watch.
Thanks for the video, enjoyed watching. One of the first things I was told when I went west with an RV was if you shut down for the night or longer, lift the hood on the engine or you will have some unwanted guest in the form of pack rats and they oh so love chewing on wire,thank goodness I didn’t have to find that out the hard way, I have heard some real horror stories about the destruction they can do. Appreciate your time and effort you put into the videos.
Yes direction anymore makes me mad Spanish first like front 5 pages then last page half page English and not very clear at that….new America. Good job as usual, good to see the dogs too.
Sending You parts that actually work seems a lot to ask for but notices and instructions in a foreign language is a blatant middle finger. Best Wishes to You and Your Family Warren.
I always quess low ,does $500 an injector come close ?
You are not a second class citizen, they got the instructions, you were expected to know already. Good job. Torque spec is tight enough.
G'day Warren,
Thanks man ,cool vid ,they always are.
Love the stories too ,just as much as the equipment n fixes .
Your channel rulz YT .
Keep em comming brother.
Respect…..!
I know it's off the subject but how long should it take to remove and replace the steering axle, check bearings, replace seals, replace brake chambers on a 4370 IHC truck?
Of corse, Biden and his green weanies would just say "well! that farmer just needs to scrap everything, and buy electric loaders, tractors, etc. .. No problem, right!? Bunch of colossal MORONS.. Take care Warren. Todd the retired trucker.
You should invite this guy to come help you. He is 16 years old and does exactly every thing you do – one his one. Heavy machinery, buys and repair then and sells them of and buys more. All kinds. https://www.youtube.com/watch?v=BTXcVfMMNOs , https://www.youtube.com/watch?v=FR26M-ukmSQ
You got that right these piece of shit communist are ruining everything. That guy may not own all that land one day soon because the trash government we got.
I used to turn wrenches for a mining company they had an old Komatsu PC-400-1 excavator with a NTC 855 in it. We had a lot of injector problems with it. The plungers would stick down and score the barrels continuously. We figured out that the ultra low sulfur off road Diesel fuel didn’t have enough lubrication for the old mechanical injectors. ( thanks Uncle Sam ) So with this particular machine we started adding like a gallon of used motor oil to the fuel every time she got fueled up. Problem disappeared.
Thanks Warren
It drives me fucking crazy we can't have English papers inside a fucking package inside the United States. State of this entire country has been going to shit very fast, I got no damn clue what will happen in the future.
Thank you.
Do barn owls eat pack rats? They like goffers and moles, and there's plenty of room for a barn owl box.
So do you think the injector was leaking into the cylinder or bypassing internaly out the return?
So does the company have to pay since the injector failed and costed more damage
Got er done!
It’s sad that customer service and quality control are lost at most large companies and that people accept it. Yeah they will maybe replace the part but who pays for the time and labor from the failure.
I haven’t had the time to watch Warren’s channel as much as I would like but still love the technical content as well as the pearls of wisdom. That last saying, “If it ain’t Chicken sh#t, it sure has henhouse ways about it.” I’m still laughing.😆🤣😂
It brings back fond memories of my long deceased revered Texas grandparents who always had just the right words to fit the moment.
Thanks for the time and video feller.. Hope you're able to get enough rest👍👍👊
Thanks Warren for another great video.
Thanks for the video Warren!
What he said at 9.20 😊
those 6.6 are good engines back when I was field tech for a certain rental company they were in atlas copco 750 compressors and never had any major problem with the 2 dozen or so that I took care of, sad to think about how many perfectly good running ones ended up getting destroyed and replaced with T4 6068 Deere engines thanks to Obama and the tree humpers
Thanks for taking us along, I enjoyed as usual. Take care
Good show.
now i know whats wrong with my 3126 cat thank you warren
Are you able to put the new injector trim file into the ecm with your software?
Even if you replace all 6 that ain’t saying they will be any better than the ones you take out the way reman quality is going these days
Hey, I’m wondering if anybody’s familiar with the Detroit 8.2 L
Prices are out of control
Cat own Perkins and so if it's a pease of shit or not. Cat most think they are alright. I have a Massey Ferguson tractor and that's a Perkins Engine and it's never give any trouble. It's the new parts many a time that are faulty. We have had parts for all different makes that are faulty. We have even calibrated new injectors.
Numerous: and on ThrumsBC cam , and at c&c equipment and other sites see this utube…..don't forget city hall union fan's fock.
Dang it Warren, long time no hear from. Thanks for tgevideo. Hoping we'll see you again soon!!
Every customer I deal with only wants to change the injectors that are bad…been like this for 2 years now it seems….no skin off my back this is what they are paying me to do nothing more…dont bother me a bit
You are a saint for getting a puppy to harass Josie!.
Warren can’t tell you how much I’ve enjoyed your videos over the last couple of years .
As dirty as that oil was they should show the CAT some love!.
You're sounding hale and hearty Warren. You always brighten my day.
Hey Warren, lots of work this time of year. It seems to me that quality is nonexistent now a days. I got a box of Kleenex sitting next to me and every time I pull one out it’s all wrinkled and deformed. I don’t remember that happening 30 years ago! It’s all about profit over anything else. You’re the man my friend. Thanks much for getting us a video to watch.
Black as oil eh 😊
Yep Welcome to Bidens Demented World eh Lol
Thanks for the video, enjoyed watching. One of the first things I was told when I went west with an RV was if you shut down for the night or longer, lift the hood on the engine or you will have some unwanted guest in the form of pack rats and they oh so love chewing on wire,thank goodness I didn’t have to find that out the hard way, I have heard some real horror stories about the destruction they can do. Appreciate your time and effort you put into the videos.
You can see how they want to replace straight white males with mud bloods.
"trying to keep up with all the blown up shit everywhere" 🤣
Another job you make look easy, great job!
Cummins paid Clessie a lot of money to stay away after 1955.
Yes direction anymore makes me mad Spanish first like front 5 pages then last page half page English and not very clear at that….new America. Good job as usual, good to see the dogs too.
Agreed on the Commies! Nothing but a bunch of bull crap!!
Nice job Warren
Sending You parts that actually work seems a lot to ask for but notices and instructions in a foreign language is a blatant middle finger.
Best Wishes to You and Your Family Warren.