Guide
Disassembly of thetreadmill walkingpad x21 motor part 5
Disassembly of thetreadmill walkingpad x21 motor part 5
#Disassembly #thetreadmill #walkingpad #x21 #motor #part
“Каот Чебурке”
In my situation, the treadmill was noisy because of a faulty motor. The bearing had wear and the bearing seat had a backlash. To remove the backlash of the bearing seat, I used a shaft bushing retainer (for example, loctite). For repair, we need a new bearing 6002 (rs or rz or zz), loctite,…
source
To see the full content, share this page by clicking one of the buttons below |