Guide
#failybrakes #mechanic #brakefailure #howto #diy #repair
#failybrakes #mechanic #brakefailure #howto #diy #repair #fix #car #fail
#failybrakes #mechanic #brakefailure #howto #diy #repair
“Car fact14”
To see the full content, share this page by clicking one of the buttons below |
They didn’t put the brake pads on 😂
Cheap pads
Not a drop of lubrication on that hardware
Brake pads need to break in its called burnishing. Just keep driving and will go away after a few days of hard driving
Where's the caliper?
They fliped the pads so the brake pad is on the Outside and the Metal body against the Disk.
The rotor is old and pads not new most likely they either didn't change anything or they replaced with used parts
They are used
Anti rattle clip missing
By your ur middle finger is polished. The pads were on with the friction surface facing outwards.
They’re glazed
Brake pad metal warning clip bent to shit, likes like itd make noise rubbing on fhe rotor.
Probably didn’t take the voting off the rotor
Brake pad is cracked
I know whats wrong with it. It aint got no gas in it.
The brake pads look old. They probably didn’t resurface the rotors and put new pads on. Maybe they resurface the rotors and put it on the old brake pads. You would get glazing heat spots and you would feel it in the steering wheel.
Glazing
The disc has to much wear and has a big lip on the edge
Cheap parts ?
I dont know man i am not a mechanic