REPAIR ENGINE NUMBER SHAFT Tricycles DAMAGED.

That ring and pinion is junk and the bearing with it dropping in like it did with no crush tolerance. It’s going to wear out fast. You should’ve used the centerpunch to around the outside of the housing so that it tightens up on the bearing race because otherwise it will spin. And reusing the ring and pinion the way you did that rear end is going to be very noisy if not even lock up and cause an accident! The driveshaft yolk didn’t even tighten up on there to give the pinion bearings, any preload this end will most definitely cause an accident if not a death. You also forgot to put oil in the rear differential.

E rât tuyêt vời a rất thích xem e làm . Chúc e luôn thanh côg trong côg việc và trog cuộc sống e nhé

hi always put a prop undenieth the tip tray because if the lifting thing comes down on you you will be crushed ,and end up in a wheelchair or worse killed don't work over top of these trailers with a tipper ever so dangerous, never never work like that

Chinita hermosa como kisiera ser su ayudante para k terminemos mas rapido los trabajos k le llegan pero como Ud se mira k disfruta cada chambita ❤️👍

❤ naic video biutiful girl hi

♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹♥️🌹I . L . Y ♥️

Thank you for video 👍👍

You didn't put oil in the differential.

Restaurada triciclo 🛵😉

Muito bom seu trabalho ficou ótimo 👍🙏🇧🇷

❤❤❤❤❤❤❤🌹