AddWash mini-doors leak when the gasket twists, the latch wears, or detergent slime keeps the seal from seating. Replacement is mechanical, not firmware.
Checks
- Inspect gasket for folds and cuts.
- Clean residue from the seal land.
- Test latch spring tension.
- Confirm hinge screws are snug—not stripped.
Safety notes
Run an empty spin only after you are sure the door latches; a mid-spin pop dumps water.
FAQ
Part numbers?
Match exact model suffix on the rating sticker.
Still leaks at bottom?
Might be main door boot, not AddWash.
Photo: Unsplash. Repair steps are general guidance—model variants differ. Unplug power and follow ESD-safe practice before opening devices.