HP

HP Laser Printer 3050 3052 3055 Paper jam Problem

HP Laser Printer 3050 3052 3055 Paper jam Problem

#Laser #Printer #Paper #jam #Problem

“You Can Do It !”

How to solve the paper jam problem on an HP laser jet printer. This tutorial shows you in steps how to stop the jams happening and give life back to the printer.

source

 

To see the full content, share this page by clicking one of the buttons below

Related Articles

20 Comments

  1. Absolutely amazed! We have had this printer about 12 years and it has been perfect, so really disappointed when it started acting up. They don't make them anymore! So after shopping for one decided to try to fix it. So glad I did! Thank you so much!

  2. Let me add my voice to the many relieved folks who have resurrected their HP printers. Great job in your presentation! Easy to follow. My only difficulty arose when trying to insert the screw holding the solenoid. Aside from that, perfect! Thank you for posting this.

  3. So here I am an ancient HP CE (the clown that used to go on site and fix HP equipment, usually the larger units}. And here I had no idea what might cause the double feeds and jams. You nailed it. Sticky clutches are not an unknown problem to all print engines but which one? So…wham bang working again. Thanks!

  4. Brilliant. Thanks. Worked perfectly. The screw holding the solenoid to the body was a bit hard to get out and put back in. I managed to drop the screw down into the innards, never to be seen again, so watch out for this. I pinched one from the back to screw it in as it was the same type of screw, and then rummaged round in my toolkit to find a replacement for the one I pinched from the back (which wasn't quite the same but worked anyway).

  5. I’m amazed it work like you showed ar your video clip. Tank you so much from a satisfied viewer from the Netherlands. Safes me the purchase of a new printer😊😊

  6. Thanks so much for creating this video. I wasn't sure if it would work or not because it didn't appear to be sticking when I took it apart. However, it did have some black gooey stuff on one side of the two pieces that make contact. I clean both sides up good and used 2 pieces of electrical tape and not only did it work but now it sounds so much smoother. Thanks again!

  7. Great vid… Did it and my printer's working again. I actually bought a replacement solenoid but the cable was too short so had to do the repair to my own using the insulation tape and brake cleaner. Again, massive thanks.

  8. Thank you very much. Your video saved my HP LaserJet 3030 from e-waste. Although I installed new rubber rollers for the paper feed, the paper jammed again and again.
    Merry Christmas and a happy new year 2023 from Upper Franconia, Germany

Leave a Reply