Nintendo
In-depth iPad Pro Logic Board Diagnostics. How To Fix an
In-depth iPad Pro Logic Board Diagnostics. How To Fix an 11in iPad A2377 that is not charging
#Indepth #iPad #Pro #Logic #Board #Diagnostics #Fix
“VCC Board Repairs – Jesse Cruz”
This iPad Pro 11in, 3rd Generation came to me for repair after the customer tried to repair their own iPad by replacing the USB C …
source
To see the full content, share this page by clicking one of the buttons below |
If you want to diagnose these properly, you need the right charger & meter. Get them here:
⭐USB C Meter: https://www.vccboardrepairs.com/usbcmeter
⭐USB C 15V Charger: https://www.vccboardrepairs.com/brick
Hahaha 😉 good job
It's good to see that you have the same issue with these as I do, The amount of shops that have sent me a iPad not charging after a charge port replacement, for me to find that same pin snapped off. I wonder how they even do it. One thing I do when I am trying to isolate the battery is I use an screen separator card (like a plastic card) or I use a new battery plastic insert from the cardboard packets the battery cells come in, and chop them to side of the battery connector and shove them in there, that way, no damage to the connector, board or battery and the iPad is isolated.
When it came to boosting battery's back to life, I started out doing it like you did, then I got lazy, and just super glued solder wick to the plastic strip I use to isolate the battery and just connect the power supply alligator clips to that, saves having to hold the probes on.
👐
Master pls
Any update on how to 😢increase battery 🔋 life
https://youtube.com/@techmakker?si=mdahN1EY2PP8jnYN
Respect. You're a really good technician
just solder a sim reader pin. take pin from old phone
thanks jesse i am more interest with iphone repairs but this one also is good