LG Washer UE / UB Unbalance Error: How to Stop the Spin Fault

LG washer UE or UB errors mean the drum is out of balance during spin. Single heavy items—bath mats, jeans, waterproof jackets—are classic triggers. Persistent UE after careful loading can point to worn shocks or leveling feet.

Watch on YouTube: LG washer UE unbalance error

Clear UE / UB quickly

1. Pause the cycle and redistribute clothes evenly around the drum.
2. Add a towel or two to balance a single bulky item, or wash it separately.
3. Confirm the washer sits level; adjust locking feet so it does not rock.
4. Remove shipping bolts if the machine is newly installed.
5. Retry spin at a medium speed before jumping to max RPM.

Hardware checks

If every load unbalances, inspect shock absorbers and the spider arm for play. A thumping tub with light loads is a mechanical fault, not user error.

Quick FAQ

UE vs UB?

Both flag unbalance; labeling varies by series. The fix workflow is the same.

Is lower spin a permanent fix?

It reduces noise but hides worn dampers. Fix the cause if UE is constant.

Prevention tips

Mix light and heavy garments instead of running a single bathmat alone on high spin. Waterproof items trap air and bounce; use a bulky cycle when available. Recheck leveling after seasonal floor shifts. Persistent UE with every small load is a mechanical red flag—do not keep forcing maximum RPM.

Tip: Wash heavy rugs alone on a bulky cycle instead of mixing them with shirts.

General guidance for common models—always unplug power and water before service. Photo: Unsplash. Video embeds may show third-party repair demos.